How Much Does Pool Table Removal Cost? (Brisbane & Gold Coast Guide)
Updated 8 July 2026
Pool tables are the item that makes most removalists suddenly “unavailable.” The reason is slate — and slate is also why prices for pool table removal vary so much. Here's an honest breakdown of what it costs in Brisbane and on the Gold Coast, and what a proper quote should include.
Price guide at a glance
| Job type | Typical price | Notes |
|---|---|---|
| Slate table, added to a house move | from ~$220 | Cheapest way — the crew and truck are already booked |
| Slate table, standalone move | ~$350–$550 | 7ft–9ft, includes disassembly + re-level |
| Non-slate (MDF) table | ~$150–$250 | Lighter, moves in fewer pieces |
| Stairs / difficult access | +$50–$150 | Priced into the fixed quote up front |
What actually drives the price
Slate vs. MDF
Knock on the bed under the cloth: a dull solid knock is slate, a hollow one is MDF. Slate plays beautifully and lasts forever, but it's brutally heavy and cracks under flex — which is why it must be removed and transported as separate, padded pieces. MDF tables are far lighter and more forgiving.
Table size and slate count
An 8ft home table usually carries one or three slate pieces; a 9ft pub-size table is heavier again. Three-piece slates are easier to carry but need more precise re-levelling; one-piece slates need more muscle and a clearer path.
Access at both ends
Ground floor to ground floor is the base case. Stairs, split levels, tight doorways and long carries add crew and time — flagging them up front is what keeps the quote fixed and the day drama-free.
What a proper quote includes
- Full disassembly: rails, pockets, cloth care, slates and frame
- Slate trolleys and padded, on-edge slate transport
- Reassembly with slate shimming and precision levelling
- A roll test before the crew leaves
- Transit insurance covering the table door to door
If a quote is dramatically cheaper than the ranges above, ask which of those steps it skips — the usual answer is the levelling, and an unlevel table is a table you'll hate playing on.
The corridor advantage
Moving between Brisbane and the Gold Coast? A pool table rides beautifully as part of a corridor house move — the specialist handling is the same, and you save the standalone call-out. See our full pool table removal service or get a fixed quote with the table included.
Frequently asked questions
How much does it cost to move a pool table?
In Brisbane and on the Gold Coast, moving a slate pool table typically costs $350–$550 as a standalone job, or from around $220 when added to a house move. Non-slate (MDF) tables are cheaper — usually $150–$250 — because they can move in fewer pieces. Access (stairs, tight turns) and table size are the main price factors.
Why is slate pool table removal more expensive?
A slate bed comes in one to three pieces weighing 150–300kg combined, and it cracks if it flexes. Moving it safely means full disassembly, slate trolleys, padded edge-transport and precision re-levelling at the destination — specialist labour and equipment a standard furniture move doesn't need.
Can I move a pool table myself to save money?
For a slate table, we'd genuinely advise against it. The slates are the heaviest, most fragile part, and a cracked slate usually costs more to replace than the professional move would have. If it's a lightweight MDF table and a ground-floor-to-ground-floor move, a careful DIY with four people is feasible.
Get your fixed quote
Fixed-price, fully insured Brisbane to Gold Coast removals — quoted in 30 seconds, confirmed before moving day.